The Setting Station (by default extension 20) is the only extension that can set the date and time for the system.


Executive Set With 2 X 24 display (small display)


1. Press [FEAT]

2. Dial  8 2

3. The display shows the current time.

4. Enter four digits for current time (00 to 23 for hours and 00 to 59 for minutes.)

5. Enter two digits for the date (01-31).

6. Enter two digits for the month (01-12).

7. Enter two digits for the year (00-99). The display shows the digits as you enter them.

8. Press [SPKR]. The new time and date are displayed.


If you hear an error tone, check that you have entered the correct number of digits for each element of the time and date.



To abort the time and date setting process:


Press [SPKR] at any point before pressing {SAVE}.